BOCHU BOCI 2D Common Nozzles

Shop BOCHU BOCI M11×0.75 single- and double-layer 2D Common Nozzles. Open the product for all listed configurations, then match the complete Part Number, profile and aperture to your established requirement.

  • BOCHU BOCI Single/Double 2D Nozzles M11×0.75 - cutting nozzles

    BOCHU BOCI Single/Double 2D Nozzles M11×0.75

    BOCHU BOCI Single/Double 2D Nozzles M11×0.75

    In stock
    172.000 VND
    172.000 VND
Selection details & related guides

Shop BOCHU BOCI M11×0.75 single- and double-layer 2D Common Nozzles. The existing Product lists 21 aperture, profile and Part Number combinations. Confirm the nozzle family before choosing a configuration.

Open the M11×0.75 2D Common Nozzle Product

View all M11×0.75 single/double nozzle options for the complete specification table and current purchasing choices.

Examples below are different listed configurations, not a recommendation for a material, thickness or cutting process:

Check the Whole Specification, Not Just M11

Match M11×0.75 thread, single/double structure, the listed profile or specification, aperture and complete Part Number. Shared digits or a matching thread do not establish interchangeability. Follow your machine's validated process requirements; these listings do not prescribe assist gas, pressure, material or thickness.

For a different family, use 2D Bevel Nozzles or Tube Bevel Nozzles. These are separate families, not automatic substitutes for 2D Common Nozzles. See all BOCHU BOCI nozzle families if the family is uncertain.

BOCHU 2D Common Nozzle Types

BOCHU BOCI 2D common nozzles are available in single-layer and double-layer designs for fiber laser cutting. The current collection uses an M11 × 0.75 thread and includes multiple aperture sizes. Nozzle geometry, layer structure and aperture affect gas flow and must match the intended cutting process.

How to Select a 2D Common Nozzle

Confirm the M11 × 0.75 thread, single- or double-layer structure, aperture size and original BOCHU part number. Select the aperture according to the established cutting parameters rather than appearance alone. If necessary, send a photo of the existing nozzle marking and package label for identification.